Fine grained permissions

There is a general mechanism in place that allows custom permission policies to grant or deny any action on any Trac resource, or even specific versions of a resource.

That mechanism is AuthzPolicy, an optional component in tracopt.perm.authz_policy.* which is not activated by default. It can be activated via the Plugins panel in the Trac administration module.

See TracPermissions for a more general introduction to Trac permissions and permission policies.

Permission Policies

A great diversity of permission policies can be implemented and Trac comes with a few examples.

The active policies are determined by a configuration setting:

[trac]
permission_policies = DefaultWikiPolicy,
 DefaultTicketPolicy,
 DefaultPermissionPolicy,
 LegacyAttachmentPolicy

• DefaultWikiPolicy controls readonly access to wiki pages.
• DefaultTicketPolicy provides elevated privileges in the ticket system for authenticated users.
• DefaultPermissionPolicy checks for the traditional coarse-grained permissions described in TracPermissions.
• LegacyAttachmentPolicy uses the coarse-grained permissions to check permissions on attachments.

Among the optional choices, there is #AuthzPolicy, a very generic permission policy, based on an Authz-style system. See ​authz_policy.py for details.

Another permission policy #AuthzSourcePolicy, uses the ​path-based authorization defined by Subversion to enforce permissions on the version control system.

See also ​sample-plugins/permissions for more examples.

AuthzPolicy

Configuration

• Put an empty conf file (authzpolicy.conf) in a secure location on the server, not readable by users other than the webuser. If the file contains non-ASCII characters, the UTF-8 encoding should be used.
• Update your trac.ini:
  1. modify the permission_policies option in the [trac] section:

     [trac]
     permission_policies = AuthzPolicy, DefaultWikiPolicy, DefaultTicketPolicy, DefaultPermissionPolicy, LegacyAttachmentPolicy
     

  2. add a new [authz_policy] section and point the authz_file option to the conf file:

     [authz_policy]
     authz_file = /some/trac/env/conf/authzpolicy.conf
     

  3. enable the plugin through WebAdmin or by editing the [components] section:

     [components]
     tracopt.perm.authz_policy.* = enabled
     

Usage Notes

Note the order in which permission policies are specified: policies are implemented in the sequence provided and therefore may override earlier policy specifications.

A policy will return either True, False or None for a given permission check. True is returned if the policy explicitly grants the permission. False is returned if the policy explicitly denies the permission. None is returned if the policy is unable to either grant or deny the permission.

Note: Only if the return value is None will the next permission policy be consulted. If none of the policies explicitly grants the permission, the final result will be False, i.e. permission denied.

The authzpolicy.conf file is a .ini style configuration file:

[wiki:PrivatePage@*]
john = WIKI_VIEW, !WIKI_MODIFY
jack = WIKI_VIEW
* =

• Each section of the config is a glob pattern used to match against a Trac resource descriptor. These descriptors are in the form:

  <realm>:<id>@<version>[/<realm>:<id>@<version> ...]
  

Resources are ordered left to right, from parent to child. If any component is inapplicable, * is substituted. If the version pattern is not specified explicitly, all versions (@*) is added implicitly. Example: Match the WikiStart page:

[wiki:*]
[wiki:WikiStart*]
[wiki:WikiStart@*]
[wiki:WikiStart]

Example: Match the attachment wiki:WikiStart@117/attachment:FOO.JPG@* on WikiStart:

[wiki:*]
[wiki:WikiStart*]
[wiki:WikiStart@*]
[wiki:WikiStart@*/attachment:*]
[wiki:WikiStart@117/attachment:FOO.JPG]

• Sections are checked against the current Trac resource descriptor IN ORDER of appearance in the configuration file. ORDER IS CRITICAL.

• Once a section matches, the current username is matched against the keys (usernames) of the section, IN ORDER.
  • If a key (username) is prefixed with a @, it is treated as a group.
  • If a value (permission) is prefixed with a !, the permission is denied rather than granted.

The username will match any of 'anonymous', 'authenticated', <username> or '*', using normal Trac permission rules.

Note: Other groups which are created by user (e.g. by 'adding subjects to groups' on web interface page Admin / Permissions) cannot be used. See ​#5648 for details about this missing feature.

For example, if the authz_file contains:

[wiki:WikiStart@*]
* = WIKI_VIEW

[wiki:PrivatePage@*]
john = WIKI_VIEW
* = !WIKI_VIEW

and the default permissions are set like this:

john           WIKI_VIEW
jack           WIKI_VIEW
# anonymous has no WIKI_VIEW

Then:

• All versions of WikiStart will be viewable by everybody, including anonymous
• PrivatePage will be viewable only by john
• other pages will be viewable only by john and jack

Groups:

[groups]
admins = john, jack
devs = alice, bob

[wiki:Dev@*]
@admins = TRAC_ADMIN
@devs = WIKI_VIEW
* =

[*]
@admins = TRAC_ADMIN
* =

Then:

• everything is blocked (whitelist approach), but
• admins get all TRAC_ADMIN everywhere and
• devs can view wiki pages.

Some repository examples (Browse Source specific):

# A single repository:
[repository:test_repo@*]
john = BROWSER_VIEW, FILE_VIEW
# John has BROWSER_VIEW and FILE_VIEW for the entire test_repo

# The default repository (requires Trac 1.0.2 or later):
[repository:@*]
john = BROWSER_VIEW, FILE_VIEW
# John has BROWSER_VIEW and FILE_VIEW for the entire default repository

# All repositories:
[repository:*@*]
jack = BROWSER_VIEW, FILE_VIEW
# Jack has BROWSER_VIEW and FILE_VIEW for all repositories

Very granular repository access:

# John has BROWSER_VIEW and FILE_VIEW access to trunk/src/some/location/ only
[repository:test_repo@*/source:trunk/src/some/location/*@*]
john = BROWSER_VIEW, FILE_VIEW

# John has BROWSER_VIEW and FILE_VIEW access to only revision 1 of all files at trunk/src/some/location only
[repository:test_repo@*/source:trunk/src/some/location/*@1]
john = BROWSER_VIEW, FILE_VIEW

# John has BROWSER_VIEW and FILE_VIEW access to all revisions of 'somefile' at trunk/src/some/location only
[repository:test_repo@*/source:trunk/src/some/location/somefile@*]
john = BROWSER_VIEW, FILE_VIEW

# John has BROWSER_VIEW and FILE_VIEW access to only revision 1 of 'somefile' at trunk/src/some/location only
[repository:test_repo@*/source:trunk/src/some/location/somefile@1]
john = BROWSER_VIEW, FILE_VIEW

Note: In order for Timeline to work/visible for John, we must add CHANGESET_VIEW to the above permission list.

Missing Features

Although possible with the DefaultPermissionPolicy handling (see Admin panel), fine-grained permissions still miss those grouping features (see ​#9573, ​#5648). Patches are partially available, see authz_policy.2.patch, part of ​#6680.

You cannot do the following:

[groups]
team1 = a, b, c
team2 = d, e, f
team3 = g, h, i
departmentA = team1, team2

Permission groups are not supported either, so you cannot do the following:

[groups]
permission_level_1 = WIKI_VIEW, TICKET_VIEW
permission_level_2 = permission_level_1, WIKI_MODIFY, TICKET_MODIFY
[*]
@team1 = permission_level_1
@team2 = permission_level_2
@team3 = permission_level_2, TICKET_CREATE

AuthzSourcePolicy (mod_authz_svn-like permission policy)

AuthzSourcePolicy can be used for restricting access to the repository. Granular permission control needs a definition file, which is the one used by Subversion's mod_authz_svn. More information about this file format and about its usage in Subversion is available in the ​Path-Based Authorization section in the Server Configuration chapter of the svn book.

Example:

[/]
* = r

[/branches/calc/bug-142]
harry = rw
sally = r

[/branches/calc/bug-142/secret]
harry =

• / = Everyone has read access by default
• /branches/calc/bug-142 = harry has read/write access, sally read only
• /branches/calc/bug-142/secret = harry has no access, sally has read access (inherited as a sub folder permission)

Trac Configuration

To activate granular permissions you must specify the authz_file option in the [svn] section of trac.ini. If this option is set to null or not specified, the permissions will not be used.

[svn]
authz_file = /path/to/svnaccessfile

If you want to support the use of the [modulename:/some/path] syntax within the authz_file, add:

authz_module_name = modulename

where modulename refers to the same repository indicated by the <name>.dir entry in the [repositories] section. As an example, if the somemodule.dir entry in the [repositories] section is /srv/active/svn/somemodule, that would yield the following:

[svn]
authz_file = /path/to/svnaccessfile
authz_module_name = somemodule
...
[repositories]
somemodule.dir = /srv/active/svn/somemodule

where the svn access file, /path/to/svnaccessfile, contains entries such as [somemodule:/some/path].

Note: Usernames inside the Authz file must be the same as those used inside trac.

Make sure you have AuthzSourcePolicy included in the permission_policies list in trac.ini, otherwise the authz permissions file will be ignored.

[trac]
permission_policies = AuthzSourcePolicy, DefaultWikiPolicy, DefaultTicketPolicy, DefaultPermissionPolicy, LegacyAttachmentPolicy

Subversion Configuration

The same access file is typically applied to the corresponding Subversion repository using an Apache directive like this:

<Location /repos>
  DAV svn
  SVNParentPath /usr/local/svn

  # our access control policy
  AuthzSVNAccessFile /path/to/svnaccessfile
</Location>

For information about how to restrict access to entire projects in a multiple project environment see ​wiki:TracMultipleProjectsSVNAccess.

DefaultWikiPolicy and DefaultTicketPolicy

Since 1.1.2, the read-only attribute of wiki pages is enabled and enforced when DefaultWikiPolicy is in the list of active permission policies (DefaultWikiPolicy was named ReadonlyWikiPolicy from Trac 1.1.2 to 1.3.1). The default for new Trac installations in 1.3.2 and later is:

[trac]
permission_policies = DefaultWikiPolicy,
 DefaultTicketPolicy,
 DefaultPermissionPolicy,
 LegacyAttachmentPolicy

DefaultWikiPolicy returns False to deny modify, delete and rename actions on wiki pages when the page has the read-only attribute set and the user does not have WIKI_ADMIN, regardless of WIKI_MODIFY, WIKI_DELETE and WIKI_RENAME permissions. It returns None for all other cases, which causes the next permission policy in the list to be consulted.

Since 1.3.2 DefaultTicketPolicy implements the following behaviors:

• Authenticated user can edit their own comments.
• Authenticated user with TICKET_APPEND or TICKET_CHGPROP can modify the description of a ticket they reported.
• User with MILESTONE_VIEW can change the ticket milestone.

The wiki- and ticket-specific behaviors are implemented in permission policies so they can be easily replaced in case other behavior is desired.

When upgrading from earlier versions of Trac, DefaultWikiPolicy, DefaultTicketPolicy will be appended to the list of permission_policies when upgrading the environment, provided that permission_policies has the default value (ReadonlyWikiPolicy, DefaultPermissionPolicy, LegacyAttachmentPolicy if upgrading from Trac 1.1.2 or later). If any non-default permission_polices are active, DefaultWikiPolicy, DefaultTicketPolicy will need to be manually added to the list. A message will be echoed to the console when upgrading the environment, indicating if any action needs to be taken.

DefaultWikiPolicy and DefaultTicketPolicy must be listed before DefaultPermissionPolicy. The latter returns True to allow modify, delete or rename actions when the user has the respective WIKI_* permission, without consideration for the read-only attribute. Similarly, some of the behaviors implemented in DefaultTicketPolicy won't be considered if DefaultPermissionPolicy is executed first.

When active, the #AuthzPolicy should therefore come before DefaultWikiPolicy, DefaultTicketPolicy, allowing it to grant or deny the actions on individual resources, which is the usual ordering for AuthzPolicy in the permission_policies list.

[trac]
permission_policies = AuthzPolicy,
 DefaultWikiPolicy,
 DefaultTicketPolicy,
 DefaultPermissionPolicy,
 LegacyAttachmentPolicy

The placement of #AuthzSourcePolicy relative to DefaultWikiPolicy, DefaultTicketPolicy does not matter since they don't perform checks on the same realms.

For all other permission policies, the user will need to decide the proper ordering. Generally, if the permission policy should be capable of overriding the checks performed by DefaultWikiPolicy or DefaultTicketPolicy, it should come before the policy it overrides. If DefaultWikiPolicy or DefaultTicketPolicy should override the check performed by another permission policy, as is the case for those policies relative to DefaultPermissionPolicy, then the overriding policy should come first.

Debugging permissions

In trac.ini set:

[logging]
log_file = trac.log
log_level = DEBUG
log_type = file

Display the trac.log to understand what checks are being performed:

tail -n 0 -f log/trac.log | egrep '\[perm\]|\[authz_policy\]'

See the sourced documentation of the plugin for more info.

---

See also: TracPermissions, ​FineGrainedPageAuthzEditorPlugin for a simple editor.